banner

Various faucet installation methods

137 Published by admin Oct 12,2018

Various faucet installation methods
In the entire home decoration, only the kitchen and the bathroom are used for the faucet, but although only these two places will be used, the types of faucets used are also various. The installation of different faucets will also be different. Today, I will introduce you to the installation methods of various faucets.
Before installation, you must first prepare the installation tools. Check whether the matching parts are complete before installation. Common faucet parts include: hoses, rubber washers, showers, water, kidnappers, decorative caps, etc. Next, we will introduce the installation methods of various faucets.
First, the installation of single hole kitchen faucet.
The requirements are stable, because the kitchen faucet is used frequently, and it is moved and moved, so it is easy to loosen, so the lock nut must be tightened. At present, some faucets appear on the market for the screw to increase the nut fixing. This kind of stability effect is very good. If it can solve the problem of water removal, it will be a popular trend in the future.
 
Second, the installation of single hole basin faucet.
When buying a single-handle basin faucet, you should pay attention to the diameter of the water outlet. Most of the market is now a hard tube, so you should pay attention to the height of the water inlet. The 35 working points from the basin are most suitable. When installing, be sure to choose a special angle valve, and the angle valve must be fixed with the hot and cold water pipe of the wall outlet. When you find a distance between the angle valve and the water pipe on the faucet, purchase a special extension tube to connect. Remember, don’t use other water pipes to connect, because if the water pressure is too large, it will easily fall off and leak, causing damage to you. If the inlet pipe is too long to exceed the outlet pipe, you can cut off the part according to your needs. If the angle is not suitable, bend it to the position you need as needed. Remember: Do not bend hard to 90 degrees or more than 90 degrees. When installing the basin to remove water, please don’t forget to buy the small interface of the faucet (the faucet is shorted). Don’t forget to flush the water pipes buried in the wall before you install it.
 
Third, the installation of shower, bathtub faucet (wall).
When you have purchased a shower, bathtub, or wall faucet, you can choose the right height to bury the water pipe. The spacing between the hot and cold water pipes must be 15 cm. Before installation, you must not forget to rinse the water pipe to avoid excessive water quality and damage to the faucet.
Concealed shower, bath faucet: After purchasing the concealed faucet, the sluice spool should be pre-buried in the wall. Be sure to pay attention to the thickness of the bathroom wall before embedding. If the wall is too thin, the spool will not be buried. The plastic protective cover of the valve plug should not be easily removed when it is buried, so as to prevent the cement and other chores from damaging the valve core when it is buried. In addition, when pre-burying the valve core, you should also pay attention to the up and down and left and right directions of the valve core to avoid the valve core being buried. When the wall mounted faucet is pre-buried into the water pipe, the size is deviated, and the adjustment can be used to adjust the position.
 
Fourth, the installation of thermostat faucet.
Before installing the thermostatic faucet, please check if the water pipe is left hot and cold right. Remember not to connect the hot and cold water pipes incorrectly, so as to prevent the faucet from working properly. Gas and solar water heaters cannot use thermostats because the water pressure is too low. Do not forget to install the hot and cold water filter when installing the thermostat.
 
Be sure to pay attention to the installation of the faucet. If the installation is not good, it will cause a lot of trouble for the future life, such as water leakage of the faucet, so for future consideration, please install the faucet as required.

Before You Begin to install the bathroom basin tap faucet

Before You Begin to install the basin faucet 1.Shut off the main water supply. 2.Observe all loca...

Do you like ? 632

Read more

How to install the hot and cold water basin tap spout and handles?

How to install the hot and cold water basin tap spout and handles?  IMPORTANT! Use care when inst...

Do you like ? 626

Read more

How to installation the shower faucet?

How to installation the shower faucet? We appreciate your commitment to bath shower taps quality....

Do you like ? 564

Read more

Kaiping Huagao sanitary bathroom faucet

Kaiping Huagao sanitary bathroom faucet Kaiping Huagao sanitary bathroom faucet is outstanding qu...

Do you like ? 746

Read more

Huagao concealed shower faucet guarantee and how to deal with the faulty?

Huagao concealed shower faucet guarantee and how to deal with the faulty? Offering our customers ...

Do you like ? 498

Read more

How About Huagao Concealed Bathroom Faucet ?

As a domestic concealed Bathroom Faucet innovative enterprise, Huagao company was honored to be i...

Do you like ? 663

Read more

Newest Huagao chrome kitchen faucet with sprayer

Newest Huagao Chrome kitchen faucet with sprayer Huagao chrome kitchen faucet with sprayer high q...

Do you like ? 549

Read more

Modern design HGAO single lever handle kitchen taps

Modern design HGAO single lever handle kitchen taps When it comes to taking care of business in t...

Do you like ? 512

Read more